The Simple One Chair Side Amalgam Separator DD2011
The Simple One Chair Side Amalgam Separator DD2011
The Simple One DD2011 is a compact, disposable chairside amalgam separator designed for a single dental operatory. Installed beneath the dental chair in the vacuum/HVE line, it helps collect mercury-containing amalgam particles before wastewater enters the office’s central vacuum system.
This self-contained Type 3 separator requires no electricity and has no internal filters to clean or replace. Its labeled off-axis inlet and centered outlet simplify installation, while the included nylon hose-barb fittings accommodate several common dental vacuum hose sizes.
The DD2011 has a maximum flow rating of 1 liter per minute and an approximate collection capacity of 360 mL. Under typical use, the complete separator is replaced after approximately 9–12 months or sooner if a noticeable reduction in suction occurs.
This unit appears clean and unused, with the fittings and disposal caps shown in the product photographs. Its installation history has not been independently confirmed. Please verify that the separator has never been installed or exposed to dental vacuum-line waste before offering it for reuse.
Professional installation by a qualified dental-equipment technician is recommended. The buyer is responsible for confirming suitability, installation requirements, and compliance with applicable local, state, and federal regulations.
The manufacturer’s instructions identify the DD2011 as an ISO 11143-tested Type 3 separator with a 1 L/min maximum flow rate, 360 mL capacity, and fittings for 1/2-inch, 5/8-inch, and 1-inch hose. ddshgsolutions.com
Key Features
- Designed for one dental operatory
- Disposable, self-contained collection canister
- No electricity required
- No internal filters to clean
- Maximum flow rate: 1 L/min
- Collection capacity: approximately 360 mL
- Typical replacement interval: 9–12 months, depending on use
- Clearly marked inlet and outlet ports
- Tested to the ISO 11143 protocol
- Made in the USA
- Intended for inline installation in a dental vacuum/HVE line
Specifications
| Specification | Details |
|---|---|
| Manufacturer | DDShgSolutions |
| Product line | The Simple One |
| Model | DD2011 |
| Separator type | Type 3, disposable chairside separator |
| Application | Single dental operatory |
| Maximum flow | 1 liter per minute |
| Capacity | 360 mL |
| Approximate dimensions | 8.5 in. long × 3.875 in. diameter |
| Connections | 3/4-in. female NPT ports |
| Hose fittings | 1/2-in., 5/8-in. and 1-in. barbed fittings |
| Power required | None |
| Installation | Inline dental vacuum/HVE line |
| Country of manufacture | United States |
Dimensions, service interval and kit configuration are supported by a current dealer listing. practicon.com
Included
- The Simple One DD2011 separator canister
- Nylon hose-barb fittings shown
- Black disposal caps and plugs shown
Not included: Vacuum tubing, mounting hardware, recycling container or mailer, installation service, or other accessories not pictured.
